If you need us for services like this then contact us in the following link.  —–>  Contact page…..

Body off for floor repairs and full restoration.

bodylift3

 

 

 

 

 

 

Body seam rust, after I cut out the rust.

bodyseamrust

Quick patch piece

bodyseamrust1

And a little grinding to make it nice.

bodyseamrust2

 

 

 

Floor pan quick patch RS.

OtherHoleRSPan

Quick patch in.  Bottom side pictured

OtherHoleRSPan2

Looks nice finished.

OtherHoleRSPan4

 

 

Sometimes you think you can do a quick patch.

This was the area under the battery.

batterytray1

But as you try to weld the metal is too thin.  No matter how you adjust the welder you just keep blowing holes.

Batterytray3

So you just have to keep cutting bigger and bigger hoping the metal will be good enough.

Batterytray4

 

But I finally gave up and ordered a “pan half” for this one.  Didn’t need the 2nd one.

I had wasted 4 hours trying small patch though.

Batterytray6

 

Some cutting and I ended up with this hole.

Batterytray5

Tacked into place.

Batterytray7

 

And welded up.  After some grinding on top and bottom it was nice.

Batterytray8

 

Flipping pan on side for bottom rust treatment

poormansrotissoire

 

If you catch these repairs early then you dont need to spend massive amount of money.  If you repair the rust before it spreads you can extend the life.  Holes that allow in water make rust spread much faster.

If you need us for services like this then contact us in the following link.  —–>  Contact page…..